Nutmeg stitch and glue - NUTMEG -- The $200 Sailboat - Small Boat Forum Message Boards

Small Boat Forums > Small Boat Forum Message Boards > NUTMEG -- The $200 Sailboat > Nutmeg stitch and glue

Nutmeg stitch and glue

Moderated by: Thom V

New Topic

Author

Post

Georgers
Member

Joined:	Sat Apr 14th, 2007
Location:
Posts:	3
Mana:

Posted: Sun Apr 15th, 2007 05:11 am

Quote

Hi, I'm a newbie here. Has anyone built Nutmeg in the stich and glue technique? Also does anyone know if the plans come with "blueprint" type drawlings with measurements? I once ordered plans of the "nested" type, became frustrated and went for it on my own. I have built three of my own design but they are eight feet or less and now need a larger sailing boat.

Thanks

George

Thom V
Administrator

Joined:	Mon Feb 21st, 2005
Location:	Sandpoint, Idaho USA
Posts:	137
Mana:

Posted: Sun Apr 15th, 2007 06:43 pm

Quote

Hi George,

The plans are in large 'blueprint' format and come folded in a 10" x 13" Manila envelope. The largest sheet is 24" x 34" see attached photo.

Thom V

Attachment: NUTMEG Blueprints.JPG (Downloaded 91 times)

Georgers
Member

Joined:	Sat Apr 14th, 2007
Location:
Posts:	3
Mana:

Posted: Mon Apr 16th, 2007 02:45 pm

Quote

Thanks Thom V..I think I'm going to go with Nutmeg. I'm going to do it stitch and glue and may go up one notch on the bottom thickness as I know it will take a few groundings where it will be used. Thanks again,
George

Current time is 03:16 am