| Author | Post |
|---|
dagumol
Member
| Joined: | Sun May 20th, 2007 |
| Location: | |
| Posts: | 4 |
| Mana: |  |
|
Posted: Mon May 21st, 2007 11:08 am |
|
| i bought a small boat with an eska 4.5 it is a 1975 model. i cleaned the carb out like new and cannot get the top (flywheel) off to clean it so i can get a spark out of it. do i need a puller for that or is there something else im missing? Last edited on Sun Jul 1st, 2007 11:08 pm by dagumol |
puma732
Member
| Joined: | Fri Jul 6th, 2007 |
| Location: | |
| Posts: | 12 |
| Mana: | |
|
Posted: Thu Jul 26th, 2007 06:43 pm |
|
| have a manual for eska motors. do you still need info?
|
dagumol
Member
| Joined: | Sun May 20th, 2007 |
| Location: | |
| Posts: | 4 |
| Mana: | |
|
Posted: Thu Jul 26th, 2007 08:14 pm |
|
| thanks puma, actually i got one from e-bay but it does not specify as to "HOW" the flywheel comes off. it does not just pull off (I tried). i just don't know if i need a puller ans if so which one.
|
puma732
Member
| Joined: | Fri Jul 6th, 2007 |
| Location: | |
| Posts: | 12 |
| Mana: | |
|
Posted: Fri Jul 27th, 2007 01:49 pm |
|
| i'll check this weekend in case we might have different manuals...
|
dagumol
Member
| Joined: | Sun May 20th, 2007 |
| Location: | |
| Posts: | 4 |
| Mana: | |
|
Posted: Sun Oct 21st, 2007 01:40 am |
|
| i know this post has been up for a while but i STILL cannot get that bugger off.
|
richoj
Member
| Joined: | Sun Oct 28th, 2007 |
| Location: | |
| Posts: | 2 |
| Mana: | |
|
Posted: Sun Oct 28th, 2007 07:51 pm |
|
| I am looking at an Eska 9.9 Manual under "Flywheel Removal" it talks about a holding tool #670242 and a puller #670218. So, it looks to me that you need to use a puller.
|
dagumol
Member
| Joined: | Sun May 20th, 2007 |
| Location: | |
| Posts: | 4 |
| Mana: | |
|
Posted: Mon Oct 29th, 2007 02:19 am |
|
| thank you, i am going to go find a flywheel puller now. thanks again!
|
Current time is 04:05 am | |
|
